(not at the head of any monitored branch or PR)
2022-07-26 15:57.50: New job: test zmq-lwt.5.1.1 with ounit2.2.2.6, using opam dev
                              from https://github.com/ocaml/opam-repository.git#refs/pull/21354/head (10b49fadb0efcff442ed8cae85f7cc119fe28629)
                              on debian-11-ocaml-4.14/amd64

To reproduce locally:

git clone --recursive "https://github.com/ocaml/opam-repository.git" && cd "opam-repository" && git fetch origin "refs/pull/21354/head" && git reset --hard 10b49fad
git fetch origin master
git merge 42e749bdca1e36a9f7bbef60b3507d34c6c57fa3
cat > ../Dockerfile <<'END-OF-DOCKERFILE'
FROM ocaml/opam:debian-11-ocaml-4.14@sha256:1461d919411f5999f6d7ffd573b9b5385cda91accf83d3866b26097e791220be
USER 1000:1000
WORKDIR /home/opam
RUN for pkg in $(opam pin list --short); do opam pin remove "$pkg"; done
RUN opam repository remove -a multicore || true
RUN sudo ln -f /usr/bin/opam-dev /usr/bin/opam
RUN opam init --reinit -ni
ENV OPAMDOWNLOADJOBS="1"
ENV OPAMERRLOGLEN="0"
ENV OPAMSOLVERTIMEOUT="500"
ENV OPAMPRECISETRACKING="1"
RUN rm -rf opam-repository/
COPY --chown=1000:1000 . opam-repository/
RUN opam repository set-url --strict default opam-repository/
RUN opam pin add -k version -yn ounit2.2.2.6 2.2.6
RUN opam update --depexts
RUN opam remove ounit2.2.2.6 && opam install --deps-only ounit2.2.2.6 && opam install -v ounit2.2.2.6; \
    res=$?; \
    test "$res" != 31 && exit "$res"; \
    export OPAMCLI=2.0; \
    build_dir=$(opam var prefix)/.opam-switch/build; \
    failed=$(ls "$build_dir"); \
    for pkg in $failed; do \
    if opam show -f x-ci-accept-failures: "$pkg" | grep -qF "\"debian-11\""; then \
    echo "A package failed and has been disabled for CI using the 'x-ci-accept-failures' field."; \
    fi; \
    done; \
    exit 1
RUN opam update --depexts
RUN opam remove zmq-lwt.5.1.1 && opam install --deps-only zmq-lwt.5.1.1 && opam install -v zmq-lwt.5.1.1; \
    res=$?; \
    test "$res" != 31 && exit "$res"; \
    export OPAMCLI=2.0; \
    build_dir=$(opam var prefix)/.opam-switch/build; \
    failed=$(ls "$build_dir"); \
    for pkg in $failed; do \
    if opam show -f x-ci-accept-failures: "$pkg" | grep -qF "\"debian-11\""; then \
    echo "A package failed and has been disabled for CI using the 'x-ci-accept-failures' field."; \
    fi; \
    done; \
    exit 1
RUN opam update --depexts
RUN opam remove zmq-lwt.5.1.1 && opam install --deps-only --with-test zmq-lwt.5.1.1 && opam install -v --with-test zmq-lwt.5.1.1; \
    res=$?; \
    test "$res" != 31 && exit "$res"; \
    export OPAMCLI=2.0; \
    build_dir=$(opam var prefix)/.opam-switch/build; \
    failed=$(ls "$build_dir"); \
    for pkg in $failed; do \
    if opam show -f x-ci-accept-failures: "$pkg" | grep -qF "\"debian-11\""; then \
    echo "A package failed and has been disabled for CI using the 'x-ci-accept-failures' field."; \
    fi; \
    done; \
    exit 1

END-OF-DOCKERFILE
docker build -f ../Dockerfile .

2022-07-26 15:57.50: Using cache hint "ocaml/opam:debian-11-ocaml-4.14@sha256:1461d919411f5999f6d7ffd573b9b5385cda91accf83d3866b26097e791220be-ounit2.2.2.6-zmq-lwt.5.1.1-10b49fadb0efcff442ed8cae85f7cc119fe28629"
2022-07-26 15:57.50: Using OBuilder spec:
((from ocaml/opam:debian-11-ocaml-4.14@sha256:1461d919411f5999f6d7ffd573b9b5385cda91accf83d3866b26097e791220be)
 (user (uid 1000) (gid 1000))
 (workdir /home/opam)
 (run (shell "for pkg in $(opam pin list --short); do opam pin remove \"$pkg\"; done"))
 (run (shell "opam repository remove -a multicore || true"))
 (run (shell "sudo ln -f /usr/bin/opam-dev /usr/bin/opam"))
 (run (shell "opam init --reinit --config .opamrc-sandbox -ni"))
 (env OPAMDOWNLOADJOBS 1)
 (env OPAMERRLOGLEN 0)
 (env OPAMSOLVERTIMEOUT 500)
 (env OPAMPRECISETRACKING 1)
 (run (shell "rm -rf opam-repository/"))
 (copy (src .) (dst opam-repository/))
 (run (shell "opam repository set-url --strict default opam-repository/"))
 (run (shell "opam pin add -k version -yn ounit2.2.2.6 2.2.6"))
 (run (network host)
      (shell "opam update --depexts"))
 (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
      (network host)
      (shell  "opam remove ounit2.2.2.6 && opam install --deps-only ounit2.2.2.6 && opam install -v ounit2.2.2.6;\
             \n        res=$?;\
             \n        test \"$res\" != 31 && exit \"$res\";\
             \n        export OPAMCLI=2.0;\
             \n        build_dir=$(opam var prefix)/.opam-switch/build;\
             \n        failed=$(ls \"$build_dir\");\
             \n        for pkg in $failed; do\
             \n          if opam show -f x-ci-accept-failures: \"$pkg\" | grep -qF \"\\\"debian-11\\\"\"; then\
             \n            echo \"A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\";\
             \n          fi;\
             \n        done;\
             \n        exit 1"))
 (run (network host)
      (shell "opam update --depexts"))
 (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
      (network host)
      (shell  "opam remove zmq-lwt.5.1.1 && opam install --deps-only zmq-lwt.5.1.1 && opam install -v zmq-lwt.5.1.1;\
             \n        res=$?;\
             \n        test \"$res\" != 31 && exit \"$res\";\
             \n        export OPAMCLI=2.0;\
             \n        build_dir=$(opam var prefix)/.opam-switch/build;\
             \n        failed=$(ls \"$build_dir\");\
             \n        for pkg in $failed; do\
             \n          if opam show -f x-ci-accept-failures: \"$pkg\" | grep -qF \"\\\"debian-11\\\"\"; then\
             \n            echo \"A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\";\
             \n          fi;\
             \n        done;\
             \n        exit 1"))
 (run (network host)
      (shell "opam update --depexts"))
 (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
      (network host)
      (shell  "opam remove zmq-lwt.5.1.1 && opam install --deps-only --with-test zmq-lwt.5.1.1 && opam install -v --with-test zmq-lwt.5.1.1;\
             \n        res=$?;\
             \n        test \"$res\" != 31 && exit \"$res\";\
             \n        export OPAMCLI=2.0;\
             \n        build_dir=$(opam var prefix)/.opam-switch/build;\
             \n        failed=$(ls \"$build_dir\");\
             \n        for pkg in $failed; do\
             \n          if opam show -f x-ci-accept-failures: \"$pkg\" | grep -qF \"\\\"debian-11\\\"\"; then\
             \n            echo \"A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\";\
             \n          fi;\
             \n        done;\
             \n        exit 1"))
)

2022-07-26 15:57.50: Waiting for resource in pool OCluster
2022-07-27 02:16.58: Waiting for worker...
2022-07-27 02:19.52: Got resource from pool OCluster
Building on m1-a.ocamllabs.io
All commits already cached
Updating files:  37% (9996/26809)
Updating files:  38% (10188/26809)
Updating files:  39% (10456/26809)
Updating files:  40% (10724/26809)
Updating files:  41% (10992/26809)
Updating files:  42% (11260/26809)
Updating files:  43% (11528/26809)
Updating files:  44% (11796/26809)
Updating files:  45% (12065/26809)
Updating files:  46% (12333/26809)
Updating files:  47% (12601/26809)
Updating files:  48% (12869/26809)
Updating files:  49% (13137/26809)
Updating files:  50% (13405/26809)
Updating files:  51% (13673/26809)
Updating files:  52% (13941/26809)
Updating files:  53% (14209/26809)
Updating files:  54% (14477/26809)
Updating files:  55% (14745/26809)
Updating files:  56% (15014/26809)
Updating files:  57% (15282/26809)
Updating files:  58% (15550/26809)
Updating files:  59% (15818/26809)
Updating files:  60% (16086/26809)
Updating files:  61% (16354/26809)
Updating files:  62% (16622/26809)
Updating files:  63% (16890/26809)
Updating files:  64% (17158/26809)
Updating files:  65% (17426/26809)
Updating files:  66% (17694/26809)
Updating files:  67% (17963/26809)
Updating files:  68% (18231/26809)
Updating files:  69% (18499/26809)
Updating files:  70% (18767/26809)
Updating files:  71% (19035/26809)
Updating files:  72% (19303/26809)
Updating files:  73% (19571/26809)
Updating files:  74% (19839/26809)
Updating files:  75% (20107/26809)
Updating files:  76% (20375/26809)
Updating files:  77% (20643/26809)
Updating files:  78% (20912/26809)
Updating files:  79% (21180/26809)
Updating files:  80% (21448/26809)
Updating files:  81% (21716/26809)
Updating files:  82% (21984/26809)
Updating files:  82% (22018/26809)
Updating files:  83% (22252/26809)
Updating files:  84% (22520/26809)
Updating files:  85% (22788/26809)
Updating files:  86% (23056/26809)
Updating files:  87% (23324/26809)
Updating files:  88% (23592/26809)
Updating files:  89% (23861/26809)
Updating files:  90% (24129/26809)
Updating files:  91% (24397/26809)
Updating files:  92% (24665/26809)
Updating files:  93% (24933/26809)
Updating files:  94% (25201/26809)
Updating files:  95% (25469/26809)
Updating files:  96% (25737/26809)
Updating files:  97% (26005/26809)
Updating files:  98% (26273/26809)
Updating files:  99% (26541/26809)
Updating files: 100% (26809/26809)
Updating files: 100% (26809/26809), done.
HEAD is now at 42e749bdca Merge pull request #21885 from kit-ty-kate/fix-123
Merge made by the 'ort' strategy.
 packages/ounit2/ounit2.2.2.0/opam | 3 +++
 packages/ounit2/ounit2.2.2.1/opam | 3 +++
 packages/ounit2/ounit2.2.2.2/opam | 3 +++
 packages/ounit2/ounit2.2.2.3/opam | 3 +++
 packages/ounit2/ounit2.2.2.4/opam | 3 +++
 packages/ounit2/ounit2.2.2.5/opam | 3 +++
 packages/ounit2/ounit2.2.2.6/opam | 3 +++
 7 files changed, 21 insertions(+)

(from ocaml/opam:debian-11-ocaml-4.14@sha256:1461d919411f5999f6d7ffd573b9b5385cda91accf83d3866b26097e791220be)
2022-07-27 02:20.12 ---> using "d837bbe1b6e58c32e942b55a1eb695ef30d2cac63c8a5d708beb3548d17192b4" from cache

/: (user (uid 1000) (gid 1000))

/: (workdir /home/opam)

/home/opam: (run (shell "for pkg in $(opam pin list --short); do opam pin remove \"$pkg\"; done"))
Ok, ocaml-base-compiler is no longer pinned to https://github.com/ocaml/ocaml/archive/4.14.0.tar.gz (version 4.14.0)
No package build needed.
Nothing to do.
# Run eval $(opam env) to update the current shell environment
2022-07-27 02:20.12 ---> using "543d29c04ee698e03faf7cfdc4bb3cf9e04a80ab924d981f1055393f1479d117" from cache

/home/opam: (run (shell "opam repository remove -a multicore || true"))
[WARNING] No configured repositories by these names found: multicore
2022-07-27 02:20.12 ---> using "e8a5c58b05459f7be98d7b03e29623d3a05b15b34833b50ebffb60eff7871cde" from cache

/home/opam: (run (shell "sudo ln -f /usr/bin/opam-dev /usr/bin/opam"))
2022-07-27 02:20.12 ---> using "4687a20afa7557b4b2498b537430ed75c7b51cd6cad60d9c4757ff852befb1a7" from cache

/home/opam: (run (shell "opam init --reinit --config .opamrc-sandbox -ni"))
Configuring from /home/opam/.opamrc-sandbox, then /home/opam/.opamrc, and finally from built-in defaults.
Checking for available remotes: rsync and local, git.
  - you won't be able to use mercurial repositories unless you install the hg command on your system.
  - you won't be able to use darcs repositories unless you install the darcs command on your system.

This development version of opam requires an update to the layout of /home/opam/.opam from version 2.0 to version 2.1, which can't be reverted.
You may want to back it up before going further.

Continue? [y/n] y
Format upgrade done.

<><> Updating repositories ><><><><><><><><><><><><><><><><><><><><><><><><><><>
[default] synchronised from file:///home/opam/opam-repository
2022-07-27 02:20.12 ---> using "87c4051d859f505ce794fbdc2ed87105744babed536dd4b09731a9b1e22fd3d4" from cache

/home/opam: (env OPAMDOWNLOADJOBS 1)

/home/opam: (env OPAMERRLOGLEN 0)

/home/opam: (env OPAMSOLVERTIMEOUT 500)

/home/opam: (env OPAMPRECISETRACKING 1)

/home/opam: (run (shell "rm -rf opam-repository/"))
2022-07-27 02:20.12 ---> using "96a067e6b08152c0f77ff1628817c13e12ac3db1ba1ac882a90278edcbb3d011" from cache

/home/opam: (copy (src .) (dst opam-repository/))
2022-07-27 02:20.14 ---> using "5ce106567f73501cd746c3358ba50b49e5b3ad28d47e7894c1f65b44fcda87e7" from cache

/home/opam: (run (shell "opam repository set-url --strict default opam-repository/"))
[default] Initialised
2022-07-27 02:20.14 ---> using "0981e55d831537155c9e161d0ab37d0aeee18cf4c3d1dbad8143304b4c508a5d" from cache

/home/opam: (run (shell "opam pin add -k version -yn ounit2.2.2.6 2.2.6"))
ounit2 is now pinned to version 2.2.6
2022-07-27 02:20.18 ---> saved as "5fe022f83019704f452f80b482d2664c108ef3b0db68d3d1a678877c57899514"

/home/opam: (run (network host)
                 (shell "opam update --depexts"))
+ /usr/bin/sudo "apt-get" "update"
- Hit:1 http://deb.debian.org/debian bullseye InRelease
- Get:2 http://deb.debian.org/debian-security bullseye-security InRelease [48.4 kB]
- Get:3 http://deb.debian.org/debian bullseye-updates InRelease [44.1 kB]
- Get:4 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages [168 kB]
- Fetched 261 kB in 1s (451 kB/s)
- Reading package lists...
- 
2022-07-27 02:20.23 ---> saved as "bba8fa4a5c1f1400d75bbcf96a0ee68a81add5cecd202565a9f5c5fee420ee15"

/home/opam: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
                 (network host)
                 (shell  "opam remove ounit2.2.2.6 && opam install --deps-only ounit2.2.2.6 && opam install -v ounit2.2.2.6;\
                        \n        res=$?;\
                        \n        test \"$res\" != 31 && exit \"$res\";\
                        \n        export OPAMCLI=2.0;\
                        \n        build_dir=$(opam var prefix)/.opam-switch/build;\
                        \n        failed=$(ls \"$build_dir\");\
                        \n        for pkg in $failed; do\
                        \n          if opam show -f x-ci-accept-failures: \"$pkg\" | grep -qF \"\\\"debian-11\\\"\"; then\
                        \n            echo \"A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\";\
                        \n          fi;\
                        \n        done;\
                        \n        exit 1"))
[NOTE] ounit2.2.2.6 is not installed.

Nothing to do.
The following actions will be performed:
=== install 5 packages
  - install base-bytes   base  [required by ounit2]
  - install dune         3.4.1 [required by ounit2]
  - install ocamlfind    1.9.5 [required by base-bytes]
  - install seq          base  [required by ounit2]
  - install stdlib-shims 0.3.0 [required by ounit2]

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> retrieved dune.3.4.1  (cached)
-> retrieved ocamlfind.1.9.5  (cached)
-> installed seq.base
-> retrieved stdlib-shims.0.3.0  (cached)
-> installed ocamlfind.1.9.5
-> installed base-bytes.base
-> installed dune.3.4.1
-> installed stdlib-shims.0.3.0
Done.
# Run eval $(opam env) to update the current shell environment
The following actions will be performed:
=== install 1 package
  - install ounit2 2.2.6 (pinned)

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Processing  1/3:
-> retrieved ounit2.2.2.6  (cached)
Processing  2/3: [ounit2: dune build]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "dune" "build" "-p" "ounit2" "-j" "31" (CWD=/home/opam/.opam/4.14/.opam-switch/build/ounit2.2.2.6)
-> compiled  ounit2.2.2.6
-> installed ounit2.2.2.6
Done.
# Run eval $(opam env) to update the current shell environment
2022-07-27 02:21.30 ---> saved as "30ffb98ca5d746f12c3bdf5a986e46c37913ec070b54b003cb2d38c3fd7f35da"

/home/opam: (run (network host)
                 (shell "opam update --depexts"))
+ /usr/bin/sudo "apt-get" "update"
- Hit:1 http://deb.debian.org/debian bullseye InRelease
- Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease
- Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
- Reading package lists...
- 
2022-07-27 02:21.34 ---> saved as "2919a1480a2dc287c5298d1836e68fea0c6af5c5d1819935dd1505c6728c35d4"

/home/opam: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
                 (network host)
                 (shell  "opam remove zmq-lwt.5.1.1 && opam install --deps-only zmq-lwt.5.1.1 && opam install -v zmq-lwt.5.1.1;\
                        \n        res=$?;\
                        \n        test \"$res\" != 31 && exit \"$res\";\
                        \n        export OPAMCLI=2.0;\
                        \n        build_dir=$(opam var prefix)/.opam-switch/build;\
                        \n        failed=$(ls \"$build_dir\");\
                        \n        for pkg in $failed; do\
                        \n          if opam show -f x-ci-accept-failures: \"$pkg\" | grep -qF \"\\\"debian-11\\\"\"; then\
                        \n            echo \"A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\";\
                        \n          fi;\
                        \n        done;\
                        \n        exit 1"))
Nothing to do.
[NOTE] zmq-lwt.5.1.1 is not installed.

The following actions will be performed:
=== install 9 packages
  - install conf-pkg-config   2     [required by conf-zmq]
  - install conf-zmq          0.1   [required by zmq]
  - install cppo              1.6.9 [required by lwt]
  - install csexp             1.5.1 [required by dune-configurator]
  - install dune-configurator 3.4.1 [required by lwt, zmq]
  - install lwt               5.6.1 [required by zmq-lwt]
  - install ocplib-endian     1.2   [required by lwt]
  - install stdint            0.7.0 [required by zmq]
  - install zmq               5.1.1 [required by zmq-lwt]

The following system packages will first need to be installed:
    libzmq3-dev pkg-config

<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>

opam believes some required external dependencies are missing. opam can:
> 1. Run apt-get to install them (may need root/sudo access)
  2. Display the recommended apt-get command and wait while you run it manually (e.g. in another terminal)
  3. Attempt installation anyway, and permanently register that this external dependency is present, but not detectable
  4. Abort the installation

[1/2/3/4] 1
+ /usr/bin/sudo "apt-get" "install" "-qq" "-yy" "libzmq3-dev" "pkg-config"
- debconf: delaying package configuration, since apt-utils is not installed
- Selecting previously unselected package comerr-dev:amd64.
- (Reading database ... 
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18331 files and directories currently installed.)
- Preparing to unpack .../00-comerr-dev_2.1-1.46.2-2_amd64.deb ...
- Unpacking comerr-dev:amd64 (2.1-1.46.2-2) ...
- Selecting previously unselected package libicu67:amd64.
- Preparing to unpack .../01-libicu67_67.1-7_amd64.deb ...
- Unpacking libicu67:amd64 (67.1-7) ...
- Selecting previously unselected package icu-devtools.
- Preparing to unpack .../02-icu-devtools_67.1-7_amd64.deb ...
- Unpacking icu-devtools (67.1-7) ...
- Selecting previously unselected package libgssrpc4:amd64.
- Preparing to unpack .../03-libgssrpc4_1.18.3-6+deb11u1_amd64.deb ...
- Unpacking libgssrpc4:amd64 (1.18.3-6+deb11u1) ...
- Selecting previously unselected package libkdb5-10:amd64.
- Preparing to unpack .../04-libkdb5-10_1.18.3-6+deb11u1_amd64.deb ...
- Unpacking libkdb5-10:amd64 (1.18.3-6+deb11u1) ...
- Selecting previously unselected package libkadm5srv-mit12:amd64.
- Preparing to unpack .../05-libkadm5srv-mit12_1.18.3-6+deb11u1_amd64.deb ...
- Unpacking libkadm5srv-mit12:amd64 (1.18.3-6+deb11u1) ...
- Selecting previously unselected package libkadm5clnt-mit12:amd64.
- Preparing to unpack .../06-libkadm5clnt-mit12_1.18.3-6+deb11u1_amd64.deb ...
- Unpacking libkadm5clnt-mit12:amd64 (1.18.3-6+deb11u1) ...
- Selecting previously unselected package krb5-multidev:amd64.
- Preparing to unpack .../07-krb5-multidev_1.18.3-6+deb11u1_amd64.deb ...
- Unpacking krb5-multidev:amd64 (1.18.3-6+deb11u1) ...
- Selecting previously unselected package libmd-dev:amd64.
- Preparing to unpack .../08-libmd-dev_1.0.3-3_amd64.deb ...
- Unpacking libmd-dev:amd64 (1.0.3-3) ...
- Selecting previously unselected package libbsd-dev:amd64.
- Preparing to unpack .../09-libbsd-dev_0.11.3-1_amd64.deb ...
- Unpacking libbsd-dev:amd64 (0.11.3-1) ...
- Selecting previously unselected package libglib2.0-0:amd64.
- Preparing to unpack .../10-libglib2.0-0_2.66.8-1_amd64.deb ...
- Unpacking libglib2.0-0:amd64 (2.66.8-1) ...
- Selecting previously unselected package libglib2.0-data.
- Preparing to unpack .../11-libglib2.0-data_2.66.8-1_all.deb ...
- Unpacking libglib2.0-data (2.66.8-1) ...
- Selecting previously unselected package libicu-dev:amd64.
- Preparing to unpack .../12-libicu-dev_67.1-7_amd64.deb ...
- Unpacking libicu-dev:amd64 (67.1-7) ...
- Selecting previously unselected package libkrb5-dev:amd64.
- Preparing to unpack .../13-libkrb5-dev_1.18.3-6+deb11u1_amd64.deb ...
- Unpacking libkrb5-dev:amd64 (1.18.3-6+deb11u1) ...
- Selecting previously unselected package libnorm1:amd64.
- Preparing to unpack .../14-libnorm1_1.5.9+dfsg-2_amd64.deb ...
- Unpacking libnorm1:amd64 (1.5.9+dfsg-2) ...
- Selecting previously unselected package libxml2:amd64.
- Preparing to unpack .../15-libxml2_2.9.10+dfsg-6.7+deb11u2_amd64.deb ...
- Unpacking libxml2:amd64 (2.9.10+dfsg-6.7+deb11u2) ...
- Selecting previously unselected package libxml2-dev:amd64.
- Preparing to unpack .../16-libxml2-dev_2.9.10+dfsg-6.7+deb11u2_amd64.deb ...
- Unpacking libxml2-dev:amd64 (2.9.10+dfsg-6.7+deb11u2) ...
- Selecting previously unselected package libnorm-dev:amd64.
- Preparing to unpack .../17-libnorm-dev_1.5.9+dfsg-2_amd64.deb ...
- Unpacking libnorm-dev:amd64 (1.5.9+dfsg-2) ...
- Selecting previously unselected package libpgm-5.3-0:amd64.
- Preparing to unpack .../18-libpgm-5.3-0_5.3.128~dfsg-2_amd64.deb ...
- Unpacking libpgm-5.3-0:amd64 (5.3.128~dfsg-2) ...
- Selecting previously unselected package libpgm-dev:amd64.
- Preparing to unpack .../19-libpgm-dev_5.3.128~dfsg-2_amd64.deb ...
- Unpacking libpgm-dev:amd64 (5.3.128~dfsg-2) ...
- Selecting previously unselected package libsodium23:amd64.
- Preparing to unpack .../20-libsodium23_1.0.18-1_amd64.deb ...
- Unpacking libsodium23:amd64 (1.0.18-1) ...
- Selecting previously unselected package libsodium-dev:amd64.
- Preparing to unpack .../21-libsodium-dev_1.0.18-1_amd64.deb ...
- Unpacking libsodium-dev:amd64 (1.0.18-1) ...
- Selecting previously unselected package libzmq5:amd64.
- Preparing to unpack .../22-libzmq5_4.3.4-1_amd64.deb ...
- Unpacking libzmq5:amd64 (4.3.4-1) ...
- Selecting previously unselected package libzmq3-dev:amd64.
- Preparing to unpack .../23-libzmq3-dev_4.3.4-1_amd64.deb ...
- Unpacking libzmq3-dev:amd64 (4.3.4-1) ...
- Selecting previously unselected package pkg-config.
- Preparing to unpack .../24-pkg-config_0.29.2-1_amd64.deb ...
- Unpacking pkg-config (0.29.2-1) ...
- Selecting previously unselected package shared-mime-info.
- Preparing to unpack .../25-shared-mime-info_2.0-1_amd64.deb ...
- Unpacking shared-mime-info (2.0-1) ...
- Selecting previously unselected package xdg-user-dirs.
- Preparing to unpack .../26-xdg-user-dirs_0.17-2_amd64.deb ...
- Unpacking xdg-user-dirs (0.17-2) ...
- Setting up libsodium23:amd64 (1.0.18-1) ...
- Setting up libicu67:amd64 (67.1-7) ...
- Setting up xdg-user-dirs (0.17-2) ...
- Setting up libglib2.0-0:amd64 (2.66.8-1) ...
- No schema files found: doing nothing.
- Setting up libpgm-5.3-0:amd64 (5.3.128~dfsg-2) ...
- Setting up libnorm1:amd64 (1.5.9+dfsg-2) ...
- Setting up libgssrpc4:amd64 (1.18.3-6+deb11u1) ...
- Setting up libglib2.0-data (2.66.8-1) ...
- Setting up libpgm-dev:amd64 (5.3.128~dfsg-2) ...
- Setting up comerr-dev:amd64 (2.1-1.46.2-2) ...
- Setting up icu-devtools (67.1-7) ...
- Setting up pkg-config (0.29.2-1) ...
- Setting up libsodium-dev:amd64 (1.0.18-1) ...
- Setting up libmd-dev:amd64 (1.0.3-3) ...
- Setting up libicu-dev:amd64 (67.1-7) ...
- Setting up libxml2:amd64 (2.9.10+dfsg-6.7+deb11u2) ...
- Setting up libbsd-dev:amd64 (0.11.3-1) ...
- Setting up libkadm5clnt-mit12:amd64 (1.18.3-6+deb11u1) ...
- Setting up libkdb5-10:amd64 (1.18.3-6+deb11u1) ...
- Setting up libzmq5:amd64 (4.3.4-1) ...
- Setting up libxml2-dev:amd64 (2.9.10+dfsg-6.7+deb11u2) ...
- Setting up shared-mime-info (2.0-1) ...
- Setting up libkadm5srv-mit12:amd64 (1.18.3-6+deb11u1) ...
- Setting up krb5-multidev:amd64 (1.18.3-6+deb11u1) ...
- Setting up libnorm-dev:amd64 (1.5.9+dfsg-2) ...
- Setting up libkrb5-dev:amd64 (1.18.3-6+deb11u1) ...
- Setting up libzmq3-dev:amd64 (4.3.4-1) ...
- Processing triggers for libc-bin (2.31-13+deb11u3) ...

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> retrieved cppo.1.6.9  (cached)
-> retrieved csexp.1.5.1  (cached)
-> retrieved dune-configurator.3.4.1  (cached)
-> installed conf-pkg-config.2
-> installed cppo.1.6.9
-> installed csexp.1.5.1
-> retrieved lwt.5.6.1  (cached)
-> installed conf-zmq.0.1
-> retrieved ocplib-endian.1.2  (cached)
-> retrieved stdint.0.7.0  (cached)
-> retrieved zmq.5.1.1  (cached)
-> installed ocplib-endian.1.2
-> installed stdint.0.7.0
-> installed dune-configurator.3.4.1
-> installed zmq.5.1.1
-> installed lwt.5.6.1
Done.
# Run eval $(opam env) to update the current shell environment
The following actions will be performed:
=== install 1 package
  - install zmq-lwt 5.1.1

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Processing  1/3:
-> retrieved zmq-lwt.5.1.1  (cached)
Processing  2/3: [zmq-lwt: dune build]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "dune" "build" "-p" "zmq-lwt" "-j" "31" (CWD=/home/opam/.opam/4.14/.opam-switch/build/zmq-lwt.5.1.1)
-> compiled  zmq-lwt.5.1.1
-> installed zmq-lwt.5.1.1
Done.
# Run eval $(opam env) to update the current shell environment
2022-07-27 02:22.38 ---> saved as "9838b0ac6627949bb3ca54f86136120a6ecb628c299176f82d7de58d54a84c92"

/home/opam: (run (network host)
                 (shell "opam update --depexts"))
+ /usr/bin/sudo "apt-get" "update"
- Hit:1 http://deb.debian.org/debian bullseye InRelease
- Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease
- Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
- Reading package lists...
- 
2022-07-27 02:22.43 ---> saved as "fa43cd7b2f923c0e8761b5c4a1098f3e8a2714ed15bc25bbeac9178c00e73a18"

/home/opam: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))
                 (network host)
                 (shell  "opam remove zmq-lwt.5.1.1 && opam install --deps-only --with-test zmq-lwt.5.1.1 && opam install -v --with-test zmq-lwt.5.1.1;\
                        \n        res=$?;\
                        \n        test \"$res\" != 31 && exit \"$res\";\
                        \n        export OPAMCLI=2.0;\
                        \n        build_dir=$(opam var prefix)/.opam-switch/build;\
                        \n        failed=$(ls \"$build_dir\");\
                        \n        for pkg in $failed; do\
                        \n          if opam show -f x-ci-accept-failures: \"$pkg\" | grep -qF \"\\\"debian-11\\\"\"; then\
                        \n            echo \"A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.\";\
                        \n          fi;\
                        \n        done;\
                        \n        exit 1"))
The following actions will be performed:
=== remove 1 package
  - remove zmq-lwt 5.1.1

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
-> removed   zmq-lwt.5.1.1
Done.
# Run eval $(opam env) to update the current shell environment
Nothing to do.
# Run eval $(opam env) to update the current shell environment
The following actions will be performed:
=== install 1 package
  - install zmq-lwt 5.1.1

<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Processing  1/3:
-> retrieved zmq-lwt.5.1.1  (cached)
Processing  2/3: [zmq-lwt: dune build]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "dune" "build" "-p" "zmq-lwt" "-j" "31" (CWD=/home/opam/.opam/4.14/.opam-switch/build/zmq-lwt.5.1.1)
Processing  2/3: [zmq-lwt: dune runtest]
+ /home/opam/.opam/opam-init/hooks/sandbox.sh "build" "dune" "runtest" "-p" "zmq-lwt" "-j" "31" (CWD=/home/opam/.opam/4.14/.opam-switch/build/zmq-lwt.5.1.1)
- (cd _build/default/zmq-lwt/test && ./test.exe)
- .......
- Ran: 7 tests in: 0.39 seconds.
- OK
[ERROR] The compilation of zmq-lwt.5.1.1 failed at "dune runtest -p zmq-lwt -j 31".

#=== ERROR while compiling zmq-lwt.5.1.1 ======================================#
# context              2.2.0~alpha~dev | linux/x86_64 | ocaml-base-compiler.4.14.0 | file:///home/opam/opam-repository
# path                 ~/.opam/4.14/.opam-switch/build/zmq-lwt.5.1.1
# command              ~/.opam/opam-init/hooks/sandbox.sh build dune runtest -p zmq-lwt -j 31
# exit-code            1
# env-file             ~/.opam/log/zmq-lwt-39-06b57c.env
# output-file          ~/.opam/log/zmq-lwt-39-06b57c.out
### output ###
# (cd _build/default/zmq-lwt/test && ./test.exe)
# .......
# Ran: 7 tests in: 0.39 seconds.
# OK
# File "zmq/test/dune", line 5, characters 0-72:
# 5 | (alias
# 6 |  (name runtest)
# 7 |  (deps (:test test.exe))
# 8 |  (action (run %{test})))
# (cd _build/default/zmq/test && ./test.exe)
# ......Thread 1 killed on uncaught exception Zmq.ZMQ_exception(2, "Context was terminated")
# Raised at Zmq.zmq_raise in file "zmq/src/zmq.ml", line 753, characters 2-11
# Called from Zmq.Proxy.create in file "zmq/src/zmq.ml", line 557, characters 14-41
# Called from Zmq.Proxy.create in file "zmq/src/zmq.ml", line 557, characters 14-41
# Called from Zmq_test.test_proxy.proxy in file "zmq/test/zmq_test.ml", line 147, characters 6-31
# Called from Thread.create.(fun) in file "thread.ml", line 49, characters 8-14
# FError: Context not closed before finalization
# Error: Socket not closed before finalization
# Error: Socket not closed before finalization
# ......
# ==============================================================================
# Failure: Zmq:0:zmq test:6:monitor
# 
# Wrong event received
# expected: Closed: tcp://127.0.0.1:51234
# but got: Disconnect: tcp://127.0.0.1:51234. peer unknown
# ------------------------------------------------------------------------------
# Ran: 13 tests in: 1.39 seconds.
# FAILED: Cases: 13 Tried: 13 Errors: 0 Failures: 1 Skip:  0 Todo: 0 Timeouts: 0.

'opam install -v --with-test zmq-lwt.5.1.1' failed.
- File "zmq/test/dune", line 5, characters 0-72:
- 5 | (alias
- 6 |  (name runtest)
- 7 |  (deps (:test test.exe))
- 8 |  (action (run %{test})))
- (cd _build/default/zmq/test && ./test.exe)
- ......Thread 1 killed on uncaught exception Zmq.ZMQ_exception(2, "Context was terminated")
- Raised at Zmq.zmq_raise in file "zmq/src/zmq.ml", line 753, characters 2-11
- Called from Zmq.Proxy.create in file "zmq/src/zmq.ml", line 557, characters 14-41
- Called from Zmq.Proxy.create in file "zmq/src/zmq.ml", line 557, characters 14-41
- Called from Zmq_test.test_proxy.proxy in file "zmq/test/zmq_test.ml", line 147, characters 6-31
- Called from Thread.create.(fun) in file "thread.ml", line 49, characters 8-14
- FError: Context not closed before finalization
- Error: Socket not closed before finalization
- Error: Socket not closed before finalization
- ......
- ==============================================================================
- Failure: Zmq:0:zmq test:6:monitor
- 
- Wrong event received
- expected: Closed: tcp://127.0.0.1:51234
- but got: Disconnect: tcp://127.0.0.1:51234. peer unknown
- ------------------------------------------------------------------------------
- Ran: 13 tests in: 1.39 seconds.
- FAILED: Cases: 13 Tried: 13 Errors: 0 Failures: 1 Skip:  0 Todo: 0 Timeouts: 0.


<><> Error report <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
+- The following actions failed
| - build zmq-lwt 5.1.1
+- 
- No changes have been performed
# Run eval $(opam env) to update the current shell environment
[WARNING] OPAMCONFIRMLEVEL was ignored because CLI 2.0 was requested and it was introduced in 2.1.
[WARNING] OPAMCONFIRMLEVEL was ignored because CLI 2.0 was requested and it was introduced in 2.1.
"/bin/bash" "-c"
"opam remove zmq-lwt.5.1.1 && opam install --deps-only --with-test zmq-lwt.5.1.1 && opam install -v --with-test zmq-lwt.5.1.1;
        res=$?;
        test "$res" != 31 && exit "$res";
        export OPAMCLI=2.0;
        build_dir=$(opam var prefix)/.opam-switch/build;
        failed=$(ls "$build_dir");
        for pkg in $failed; do
          if opam show -f x-ci-accept-failures: "$pkg" | grep -qF "\"debian-11\""; then
            echo "A package failed and has been disabled for CI using the 'x-ci-accept-failures' field.";
          fi;
        done;
        exit 1" failed with exit status 1
2022-07-27 02:24.13: Job failed: Failed: Build failed
2022-07-27 02:24.13: Log analysis:
2022-07-27 02:24.13: >>> 
[ERROR] The compilation of zmq-lwt.5.1.1 failed at "dune runtest -p zmq-lwt -j 31".
 (score = 20)
2022-07-27 02:24.13: >>> 
# Error: Socket not closed before finalization
 (score = 48)
2022-07-27 02:24.13: Socket not closed before finalization